ISSN 0253-2778

CN 34-1054/N

open
Free to Publish. Free to Read.
Open AccessOpen Access JUSTC Chemistry

Three-dimensional tubular carbon aerogel for supercapacitors

  • Department of Chemistry, Institute of Biomimetic Materials & Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, Division of Nanomaterials & Chemistry, Hefei National Research Center for Physical Sciences at the Microscale, Institute of Energy, Hefei Comprehensive National Science Center, University of Science and Technology of China, Hefei 230026, China

Cite this:
https://doi.org/10.52396/JUSTC-2022-0065
More Information
  • Author Bio:

    Qiguo Shang is currently pursuing a master’s degree at the University of Science and Technology of China. His research focuses on the assembly and functionalization of one-dimensional nanomaterials

    Jie Xu received his Ph.D. degree in Inorganic Chemistry from the University of Science and Technology of China in 2015. His research focuses mainly on the design, synthesis and properties of one-dimensional tellurium nanostructures

    Jianwei Liu received his Ph.D. degree in Inorganic Chemistry from the University of Science and Technology of China (USTC) in 2013. He is currently a faculty in the Department of Chemistry, USTC. His research focuses mainly on the synthesis and self-assembly of nanoscale building blocks as well as their derived nanodevices

  • Corresponding author: E-mail: jwliu13@ustc.edu.cn
  • Received Date: 14 April 2022
  • Accepted Date: 10 May 2022
    Abstract

  • Abstract

    A three-dimensional elastic carbon nanotube aerogel is fabricated via a simple solution-based strategy using Te nanowires as templates, which can be recycled. The pipe diameter and wall thickness of the carbon nanotube are strongly dependent on the diameter of the Te nanowires and carbon source. The obtained free-standing carbon nanotube aerogel with a large specific surface area (up to 1865 m2∙g-1) is promising as an electrode material for supercapacitors. After combination with MnO2, the capacitor exhibits a specific capacitance of 360.4 F∙g-1 at a current of 1 A∙g-1 and retention of 97% after 2000 cycles. The high power capabilities and good stability make it a promising candidate as an electrode for supercapacitors.

    Graphical abstract

    Carbon nanotube gels with large specific surface areas are promising for use as electrode materials for supercapacitors.

    Abstract

    A three-dimensional elastic carbon nanotube aerogel is fabricated via a simple solution-based strategy using Te nanowires as templates, which can be recycled. The pipe diameter and wall thickness of the carbon nanotube are strongly dependent on the diameter of the Te nanowires and carbon source. The obtained free-standing carbon nanotube aerogel with a large specific surface area (up to 1865 m2∙g-1) is promising as an electrode material for supercapacitors. After combination with MnO2, the capacitor exhibits a specific capacitance of 360.4 F∙g-1 at a current of 1 A∙g-1 and retention of 97% after 2000 cycles. The high power capabilities and good stability make it a promising candidate as an electrode for supercapacitors.

    • Public Summary

    • Elastic carbon nanotube aerogels were fabricated via a simple hydrothermal-carbonization process using the Te NWs as the sacrificial template.
    • The inner diameter of the carbon tube can be controlled by controlling the diameter of the tellurium nanowires.
    • The unique properties of the hollow structure provide carbon nanotubes with better capacitive performance and cycling stability.

    FullText(HTML)
  • loading
    • References(38)
  • [1]
    Zhai Y P, Dou Y Q, Zhao D Y, et al. Carbon materials for chemical capacitive energy storage. Adv. Mater., 2011, 23 (42): 4828–4850. doi: 10.1002/adma.201100984
    [2]
    Zhu Y, Murali S, Stoller M D, et al. Carbon-based supercapacitors produced by activation of graphene. Science, 2011, 332 (6037): 1537–1541. doi: 10.1126/science.1200770
    [3]
    Zhou D, Cui Y, Han B H. Graphene-based hybrid materials and their applications in energy storage and conversion. Chin. Sci. Bull., 2012, 57 (23): 2983–2994. doi: 10.1007/s11434-012-5314-9
    [4]
    Zheng G Y, Lee S W, Liang Z, et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes. Nat. Nanotechnol., 2014, 9 (8): 618–623. doi: 10.1038/nnano.2014.152
    [5]
    Lou X W, Archer L A, Yang Z. Hollow micro-/nanostructures: Synthesis and applications. Adv. Mater., 2008, 20 (21): 3987–4019. doi: 10.1002/adma.200800854
    [6]
    Liu C, Li F, Ma L P, et al. Advanced materials for energy storage. Adv. Mater., 2010, 22 (8): E28–E62. doi: 10.1002/adma.200903328
    [7]
    Li H, Wang Z X, Chen L Q, et al. Research on advanced materials for Li-ion batteries. Adv. Mater., 2009, 21 (45): 4593–4607. doi: 10.1002/adma.200901710
    [8]
    Arico A S, Bruce P, Scrosati B, et al. Nanostructured materials for advanced energy conversion and storage devices. Nat. Mater., 2005, 4 (5): 366–377. doi: 10.1038/nmat1368
    [9]
    Yu X W, Manthiram A. Ambient-temperature sodium-sulfur batteries with a sodiated Nafion membrane and a carbon nanofiber-activated carbon composite electrode. Adv. Energy. Mater., 2015, 5 (12): 1500350. doi: 10.1002/aenm.201500350
    [10]
    McDonough J R, Choi J W, Yang Y, et al. Carbon nanofiber supercapacitors with large areal capacitances. Appl. Phys. Lett., 2009, 95 (24): 243109. doi: 10.1063/1.3273864
    [11]
    Kim T, Jung G, Yoo S, et al. Activated graphene-based carbons as supercapacitor electrodes with macro- and mesopores. ACS Nano, 2013, 7 (8): 6899–6905. doi: 10.1021/nn402077v
    [12]
    Kim H, Cho M Y, Kim M H, et al. A novel high-energy hybrid supercapacitor with an anatase TiO2-reduced graphene oxide anode and an activated carbon cathode. Adv. Energy. Mater., 2013, 3 (11): 1500–1506. doi: 10.1002/aenm.201300467
    [13]
    Wang G M, Wang H Y, Lu X H, et al. Solid-state supercapacitor based on activated carbon cloths exhibits excellent rate capability. Adv. Mater., 2014, 26 (17): 2676–2682. doi: 10.1002/adma.201304756
    [14]
    Kaempgen M, Chan C K, Ma J, et al. Printable thin film supercapacitors using single-walled carbon nanotubes. Nano Lett., 2009, 9 (5): 1872–1876. doi: 10.1021/nl8038579
    [15]
    Futaba D N, Hata K, Yamada T, et al. Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes. Nat. Mater., 2006, 5 (12): 987–994. doi: 10.1038/nmat1782
    [16]
    Frackowiak E, Beguin F. Electrochemical storage of energy in carbon nanotubes and nanostructured carbons. Carbon, 2002, 40 (10): 1775–1787. doi: 10.1016/S0008-6223(02)00045-3
    [17]
    De Volder M F L, Tawfick S H, Baughman R H, et al. Carbon nanotubes: Present and future commercial applications. Science, 2013, 339 (6119): 535–539. doi: 10.1126/science.1222453
    [18]
    Che G L, Lakshmi B B, Fisher E R, et al. Carbon nanotubule membranes for electrochemical energy storage and production. Nature, 1998, 393 (6683): 346–349. doi: 10.1038/30694
    [19]
    Wang D W, Li F, Liu M, et al. 3D aperiodic hierarchical porous graphitic carbon material for high-rate electrochemical capacitive energy storage. Angew. Chem. Int. Ed., 2007, 47 (2): 373–376. doi: 10.1002/anie.200702721
    [20]
    Cheng F Y, Tao Z L, Liang J, et al. Template-directed materials for rechargeable lithium-ion batteries. Chem. Mater., 2008, 20 (3): 667–681. doi: 10.1021/cm702091q
    [21]
    Yoo E, Kim J, Hosono E, et al. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Lett., 2008, 8 (8): 2277–2282. doi: 10.1021/nl800957b
    [22]
    Wang D, Choi D, Li J, et al. Self-assembled TiO2-graphene hybrid nanostructures for enhanced Li-ion insertion. ACS Nano, 2009, 3 (4): 907–914. doi: 10.1021/nn900150y
    [23]
    Chen S, Zhu J W, Wu X D, et al. Graphene oxide-MnO2 nanocomposites for supercapacitors. ACS Nano, 2010, 4 (5): 2822–2830. doi: 10.1021/nn901311t
    [24]
    Reddy A L M, Srivastava A, Gowda S R, et al. Synthesis of nitrogen-doped graphene films for lithium battery application. ACS Nano, 2010, 4 (11): 6337–6342. doi: 10.1021/nn101926g
    [25]
    Wu Z S, Ren W C, Xu L, et al. Doped graphene sheets as anode materials with superhigh rate and large capacity for lithium ion batteries. ACS Nano, 2011, 5 (7): 5463–5471. doi: 10.1021/nn2006249
    [26]
    Zhang L L, Zhao X S. Carbon-based materials as supercapacitor electrodes. Chem. Soc. Rev., 2009, 38 (9): 2520–2531. doi: 10.1039/B813846J
    [27]
    Qian H S, Yu S H, Gong J Y, et al. High-quality luminescent tellurium nanowires of several nanometers in diameter and high aspect ratio synthesized by a poly (vinyl pyrrolidone)-assisted hydrothermal process. Langmuir, 2006, 22 (8): 3830–3835. doi: 10.1021/la053021l
    [28]
    Liang H W, Wang L, Chen P Y, et al. Carbonaceous nanofiber membranes for selective filtration and separation of nanoparticles. Adv. Mater., 2010, 22 (42): 4691–4695. doi: 10.1002/adma.201001863
    [29]
    Fan Z J, Yan J, Wei T, et al. Asymmetric supercapacitors based on graphene/MnO2 and activated carbon nanofiber electrodes with high power and energy density. Adv. Funct. Mater., 2011, 21 (12): 2366–2375. doi: 10.1002/adfm.201100058
    [30]
    Wei W, Cui X, Chen W, et al. Manganese oxide-based materials as electrochemical supercapacitor electrodes. Chem. Soc. Rev., 2011, 40 (3): 1697–1721. doi: 10.1039/C0CS00127A
    [31]
    Yu G, Hu L, Vosgueritchian M, et al. Solution-processed graphene/MnO2 nanostructured textiles for high-performance electrochemical capacitors. Nano Lett., 2011, 11 (7): 2905–2911. doi: 10.1021/nl2013828
    [32]
    Wu Z S, Ren W C, Wang D W, et al. High-energy MnO2 nanowire/graphene and graphene asymmetric electrochemical capacitors. ACS Nano, 2010, 4 (10): 5835–5842. doi: 10.1021/nn101754k
    [33]
    Guo C X, Wang M, Chen T, et al. A hierarchically nanostructured composite of MnO2/conjugated polymer/graphene for high-performance lithium ion batteries. Adv. Energy. Mater., 2011, 1 (5): 736–741. doi: 10.1002/aenm.201100223
    [34]
    Lyu X M, Su F H, Miao M H. Two-ply yarn supercapacitor based on carbon nanotube/stainless steel core-sheath yarn electrodes and ionic liquid electrolyte. J. Power Sources, 2016, 307: 489–495. doi: 10.1016/j.jpowsour.2015.12.114
    [35]
    He S S, Hu Y J, Wan J X, et al. Biocompatible carbon nanotube fibers for implantable supercapacitors. Carbon, 2017, 122: 162–167. doi: 10.1016/j.carbon.2017.06.053
    [36]
    Wan L, Shamsaei E, Easton C D, et al. ZIF-8 derived nitrogen-doped porous carbon/carbon nanotube composite for high-performance supercapacitor. Carbon, 2017, 121: 330–336. doi: 10.1016/j.carbon.2017.06.017
    [37]
    Rong K, Wei J L, Wang Y C, et al. Deep eutectic solvent assisted zero-waste electrospinning of lignin fiber aerogels. Green Chem., 2021, 23 (16): 6065–6075. doi: 10.1039/D1GC01872H
    [38]
    Chakraborty S, Simon R, Vadakkekara A, et al. Microwave assisted synthesis of poly(ortho-phenylenediamine-co-aniline) and functionalised carbon nanotube nanocomposites for fabric-based supercapacitors. Electrochim. Acta, 2022, 403: 139678. doi: 10.1016/j.electacta.2021.139678
    • Supplements(0)
    • Related Articles
    • Track Citations
  • 加载中

Catalog

    |
    Get Citation
    PDF
    XML

    Figure  1.  (a) Schematic of the typical synthesis of the carbon tube. (b,c) TEM images of the Te@C fiber (Te NWs coated with a uniform carbon shell) at different magnifications. The inset of (c) shows a HRTEM image of the inner Te NW. (d–f) Maps of the Te@C nanocable. (g) Corresponding selected-area electron diffraction pattern of a Te@C nanowire cable.

    Figure  2.  Morphology control of the tubular carbon aerogel. (a–d) TEM images of Te NWs with different diameters of 10, 20, 40, 80 nm, respectively. (e,f) TEM images of the Te@C fibers obtained with Te NWs with different diameters as templates. (i–l) TEM images of the carbon nanotubes with different pipe diameters and wall thicknesses obtained using the Te@C precursor (e,f) by a high-temperature annealing.

    Figure  3.  Electrochemical performances measured in a two-electrode system. Cyclic voltammograms of the carbon nanotube-10, carbon nanotube-20, carbon nanotube-40, and carbon nanotube-80 at scan rates of (a) 50 mV∙s−1 and (b) 100 mV∙s−1. (c) Galvanostatic charge–discharge curves at 1 A∙g−1. (d) Volumetric capacitances at different current densities.

    Figure  4.  (a) SEM image of the carbon nanotube-40. (b) SEM image of the MnO2@carbon nanotube-40. (c) TEM image of the MnO2@carbon nanotube-40. (d) TEM image of the MnO2@carbon nanotube-40 at a high magnification.

    Figure  5.  Electrochemical performances measured in a two-electrode system. Cyclic voltammograms of the MnO2@carbon nanotube-40 at scan rates of 50 and 100 mV∙s −1. (b) Galvanostatic charge–discharge curves of the MnO2@carbon nanotube-40 at different current densities. (c) Volumetric capacitances of the MnO2@ carbon nanotube-40 and carbon nanotube-x (x = 10, 20, 40, 80) at different current densities. (d) Triangular shapes of the first and 2000th cycles.

    [1]
    Zhai Y P, Dou Y Q, Zhao D Y, et al. Carbon materials for chemical capacitive energy storage. Adv. Mater., 2011, 23 (42): 4828–4850. doi: 10.1002/adma.201100984
    [2]
    Zhu Y, Murali S, Stoller M D, et al. Carbon-based supercapacitors produced by activation of graphene. Science, 2011, 332 (6037): 1537–1541. doi: 10.1126/science.1200770
    [3]
    Zhou D, Cui Y, Han B H. Graphene-based hybrid materials and their applications in energy storage and conversion. Chin. Sci. Bull., 2012, 57 (23): 2983–2994. doi: 10.1007/s11434-012-5314-9
    [4]
    Zheng G Y, Lee S W, Liang Z, et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes. Nat. Nanotechnol., 2014, 9 (8): 618–623. doi: 10.1038/nnano.2014.152
    [5]
    Lou X W, Archer L A, Yang Z. Hollow micro-/nanostructures: Synthesis and applications. Adv. Mater., 2008, 20 (21): 3987–4019. doi: 10.1002/adma.200800854
    [6]
    Liu C, Li F, Ma L P, et al. Advanced materials for energy storage. Adv. Mater., 2010, 22 (8): E28–E62. doi: 10.1002/adma.200903328
    [7]
    Li H, Wang Z X, Chen L Q, et al. Research on advanced materials for Li-ion batteries. Adv. Mater., 2009, 21 (45): 4593–4607. doi: 10.1002/adma.200901710
    [8]
    Arico A S, Bruce P, Scrosati B, et al. Nanostructured materials for advanced energy conversion and storage devices. Nat. Mater., 2005, 4 (5): 366–377. doi: 10.1038/nmat1368
    [9]
    Yu X W, Manthiram A. Ambient-temperature sodium-sulfur batteries with a sodiated Nafion membrane and a carbon nanofiber-activated carbon composite electrode. Adv. Energy. Mater., 2015, 5 (12): 1500350. doi: 10.1002/aenm.201500350
    [10]
    McDonough J R, Choi J W, Yang Y, et al. Carbon nanofiber supercapacitors with large areal capacitances. Appl. Phys. Lett., 2009, 95 (24): 243109. doi: 10.1063/1.3273864
    [11]
    Kim T, Jung G, Yoo S, et al. Activated graphene-based carbons as supercapacitor electrodes with macro- and mesopores. ACS Nano, 2013, 7 (8): 6899–6905. doi: 10.1021/nn402077v
    [12]
    Kim H, Cho M Y, Kim M H, et al. A novel high-energy hybrid supercapacitor with an anatase TiO2-reduced graphene oxide anode and an activated carbon cathode. Adv. Energy. Mater., 2013, 3 (11): 1500–1506. doi: 10.1002/aenm.201300467
    [13]
    Wang G M, Wang H Y, Lu X H, et al. Solid-state supercapacitor based on activated carbon cloths exhibits excellent rate capability. Adv. Mater., 2014, 26 (17): 2676–2682. doi: 10.1002/adma.201304756
    [14]
    Kaempgen M, Chan C K, Ma J, et al. Printable thin film supercapacitors using single-walled carbon nanotubes. Nano Lett., 2009, 9 (5): 1872–1876. doi: 10.1021/nl8038579
    [15]
    Futaba D N, Hata K, Yamada T, et al. Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes. Nat. Mater., 2006, 5 (12): 987–994. doi: 10.1038/nmat1782
    [16]
    Frackowiak E, Beguin F. Electrochemical storage of energy in carbon nanotubes and nanostructured carbons. Carbon, 2002, 40 (10): 1775–1787. doi: 10.1016/S0008-6223(02)00045-3
    [17]
    De Volder M F L, Tawfick S H, Baughman R H, et al. Carbon nanotubes: Present and future commercial applications. Science, 2013, 339 (6119): 535–539. doi: 10.1126/science.1222453
    [18]
    Che G L, Lakshmi B B, Fisher E R, et al. Carbon nanotubule membranes for electrochemical energy storage and production. Nature, 1998, 393 (6683): 346–349. doi: 10.1038/30694
    [19]
    Wang D W, Li F, Liu M, et al. 3D aperiodic hierarchical porous graphitic carbon material for high-rate electrochemical capacitive energy storage. Angew. Chem. Int. Ed., 2007, 47 (2): 373–376. doi: 10.1002/anie.200702721
    [20]
    Cheng F Y, Tao Z L, Liang J, et al. Template-directed materials for rechargeable lithium-ion batteries. Chem. Mater., 2008, 20 (3): 667–681. doi: 10.1021/cm702091q
    [21]
    Yoo E, Kim J, Hosono E, et al. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Lett., 2008, 8 (8): 2277–2282. doi: 10.1021/nl800957b
    [22]
    Wang D, Choi D, Li J, et al. Self-assembled TiO2-graphene hybrid nanostructures for enhanced Li-ion insertion. ACS Nano, 2009, 3 (4): 907–914. doi: 10.1021/nn900150y
    [23]
    Chen S, Zhu J W, Wu X D, et al. Graphene oxide-MnO2 nanocomposites for supercapacitors. ACS Nano, 2010, 4 (5): 2822–2830. doi: 10.1021/nn901311t
    [24]
    Reddy A L M, Srivastava A, Gowda S R, et al. Synthesis of nitrogen-doped graphene films for lithium battery application. ACS Nano, 2010, 4 (11): 6337–6342. doi: 10.1021/nn101926g
    [25]
    Wu Z S, Ren W C, Xu L, et al. Doped graphene sheets as anode materials with superhigh rate and large capacity for lithium ion batteries. ACS Nano, 2011, 5 (7): 5463–5471. doi: 10.1021/nn2006249
    [26]
    Zhang L L, Zhao X S. Carbon-based materials as supercapacitor electrodes. Chem. Soc. Rev., 2009, 38 (9): 2520–2531. doi: 10.1039/B813846J
    [27]
    Qian H S, Yu S H, Gong J Y, et al. High-quality luminescent tellurium nanowires of several nanometers in diameter and high aspect ratio synthesized by a poly (vinyl pyrrolidone)-assisted hydrothermal process. Langmuir, 2006, 22 (8): 3830–3835. doi: 10.1021/la053021l
    [28]
    Liang H W, Wang L, Chen P Y, et al. Carbonaceous nanofiber membranes for selective filtration and separation of nanoparticles. Adv. Mater., 2010, 22 (42): 4691–4695. doi: 10.1002/adma.201001863
    [29]
    Fan Z J, Yan J, Wei T, et al. Asymmetric supercapacitors based on graphene/MnO2 and activated carbon nanofiber electrodes with high power and energy density. Adv. Funct. Mater., 2011, 21 (12): 2366–2375. doi: 10.1002/adfm.201100058
    [30]
    Wei W, Cui X, Chen W, et al. Manganese oxide-based materials as electrochemical supercapacitor electrodes. Chem. Soc. Rev., 2011, 40 (3): 1697–1721. doi: 10.1039/C0CS00127A
    [31]
    Yu G, Hu L, Vosgueritchian M, et al. Solution-processed graphene/MnO2 nanostructured textiles for high-performance electrochemical capacitors. Nano Lett., 2011, 11 (7): 2905–2911. doi: 10.1021/nl2013828
    [32]
    Wu Z S, Ren W C, Wang D W, et al. High-energy MnO2 nanowire/graphene and graphene asymmetric electrochemical capacitors. ACS Nano, 2010, 4 (10): 5835–5842. doi: 10.1021/nn101754k
    [33]
    Guo C X, Wang M, Chen T, et al. A hierarchically nanostructured composite of MnO2/conjugated polymer/graphene for high-performance lithium ion batteries. Adv. Energy. Mater., 2011, 1 (5): 736–741. doi: 10.1002/aenm.201100223
    [34]
    Lyu X M, Su F H, Miao M H. Two-ply yarn supercapacitor based on carbon nanotube/stainless steel core-sheath yarn electrodes and ionic liquid electrolyte. J. Power Sources, 2016, 307: 489–495. doi: 10.1016/j.jpowsour.2015.12.114
    [35]
    He S S, Hu Y J, Wan J X, et al. Biocompatible carbon nanotube fibers for implantable supercapacitors. Carbon, 2017, 122: 162–167. doi: 10.1016/j.carbon.2017.06.053
    [36]
    Wan L, Shamsaei E, Easton C D, et al. ZIF-8 derived nitrogen-doped porous carbon/carbon nanotube composite for high-performance supercapacitor. Carbon, 2017, 121: 330–336. doi: 10.1016/j.carbon.2017.06.017
    [37]
    Rong K, Wei J L, Wang Y C, et al. Deep eutectic solvent assisted zero-waste electrospinning of lignin fiber aerogels. Green Chem., 2021, 23 (16): 6065–6075. doi: 10.1039/D1GC01872H
    [38]
    Chakraborty S, Simon R, Vadakkekara A, et al. Microwave assisted synthesis of poly(ortho-phenylenediamine-co-aniline) and functionalised carbon nanotube nanocomposites for fabric-based supercapacitors. Electrochim. Acta, 2022, 403: 139678. doi: 10.1016/j.electacta.2021.139678
    Recommended articles
    TrendMD
    Volume 52 Issue 8 page: 6
    Cover

    Article Metrics

    Article views (479) PDF downloads(1624)
    Proportional views

    Copyright © Editorial Office of JUSTC, All Rights Reserved. 皖ICP备05002528号

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return